The precision planed table is mounted on 4 big columns to give stability even under very heavy loads.
The 2 speed rise and fall of the table, driven by its own motor is standard on all machines, the passage of the wood is 300 mm!
For wet or damp timber adjustable rollers (1 or 2) can be provided. Please note that this option must be ordered with the initial order for the machine.
The cast iron table is precision planed for smooth sliding of the workpiece. Highest quality 'cold process machining’ is used, which ensures the table surface stays absolutely flat troughout it’s life.
Standard equipment on the machine: digital read-out with precision 0,1 mm.
The so called ‘boxframe’ is carefully designed to maximise strength and rigidity and built of 6 and 8 mm steel plate, resulting in an extremely sturdy and torsion resistant base.
Serrated infeed roller (optional sectional infeed roller)
Smooth outfeed rollers
4-knive cutterblock (optional TERSA)
Optional friction reduction rollers
Motor and transmissions:
The machine is equipped in the standard version with a 5,5 kW motor. Optional motors of 7,5 and 11 kW can be provided.
Standard tension is 400 Volt, upon request the machine can be made in 230 Volt threephase.
The transmission of the cutter block is achieved by 3 V-belts, the transmission of the feeding rollers is achieved by double sprockets and chains with automatic tensioners.
All different arbors and automatic chain tensioners have double bearings.
Standard equipment on the S-630:
2-speed rise and fall of the table, digital read-out with precision 0,1 mm. (capacity 300 mm)
Mounted via 4 big columns, the table offers great stability even when working with long, heavy timbers.
For wet or damp timber, adjustable, retractable rollers (1 or 2) can be provided.
This option gives you an advantage when productivity is more important than the purity of the wood.
Note that this option must be ordered with the initial order for the machine.
Feeding of the wood
Standard on all machines: heavy pushers on both in-and outfeed side, 2 steel outfeed rollers, 120 mm diameter 4 knife cutter-block.
The optional ‘TERSA’ cutter-block with 4 turnblades provides a major advantage of quick precision setting of knives.
Standard equipement on the machine: separate motor drive of feed rollers with variable speed from 5 to 22 m/min.
Optional: the machine can be equipped with neoprene outfeed rollers.
4 sturdy columns support the thicknesser.
Stepless feeding of the wood: speeds of 5 to 22m/min.
2 table rollers: for easier sliding of damp timber.
Spiral infeed roller guarantees an efficient feed motion of the wood and a good quality.
Digital read-out thicknesser.
With the sectional infeed roller, it is possible to work wood with different thicknesses (thickness difference up to 2 mm) and the feed motion of long pieces with a difference of 2 mm between beginning and end.
Tersa cutterblock: fast changing of the knives and small response time thanks to the TERSA knive system.
Height-adjustment scissor table
Delivery and installation is available on all of our machines.
Please contact the showroom to discuss the best option for you, or submit us an enquiry using the form on this page