Latest Products from MWMachinery.co.uk

Robland NXZ Panel Saw

Mon, 16 Jan 2012 10:36:54 GMT

Robland Sliding table saw E2800

Mon, 16 Jan 2012 09:29:33 GMT

Robland E2800 Buit to your specifications single or three phase .

Briquetting press Falach 35

Fri, 13 Jan 2012 12:11:43 GMT

Falach 35 is a briquetting press is equipped with an automatic shutdown.

The Falach 35 is a briquetting press, which Solves Woodworking firms saw dust problem, what to do with sawdust or shavings?

This machine will create 35 kg of briquettes an hour, which can be re-cycled into a profitable material helping the environment and lowering your carbon footprint .

Briquetting press Falach 50

Fri, 13 Jan 2012 09:10:13 GMT

Briquetting press FALACH 50 is equipped with a hydraulic oil cooler, which ensures the possibility of continuous operation. If you use a dust material shorten production cycle 'to ensure higher quality briquettes smaller length, but not decrease the overall performance of the press. Hardened press and carbonised die ensure high durability .

Startrite MDE-HCE Dust Extraction Unit

Wed, 11 Jan 2012 16:13:32 GMT

As well as being suitable for use with a single machine, The MDE-HCS, with suction capacity of 3000 M3 / Hour, is suitable for powering a small to medium extraction system. For larger systems or more demanding tasks the MDE-HCT, with suction capacity of 5000 M3/Hour, is ideal.
On all three models the motor unit can be turned upside down, allowing easier connection to a wall mounted system .

Martin TS200 Tilting Spindle Moulder

Wed, 11 Jan 2012 10:44:12 GMT

Benefits of the Martin TS200
Tilting gives the operator a whole range of new possibilities on how to machine a work piece. When the arbour is tilted back, the operator can securely machine a work piece from below, which is an essential step towards more flexibility and safety. The cutting height as well as the tilting angle is adjusted via hand wheel according to a digital display or scale. The operational elements are easily accessible so the cutting height as well as the cutting angle can be adjusted quickly. The cutting depth is adjusted at the fence.

The basic machine is equipped with a powerful 4 KW motor, the rotational speeds of the spindle range between 1,500 and 9,000 rpm and can be changed via a belt change. The cast iron work table safely supports your work piece. If larger work pieces have to be machined, the TS200 can be ordered with optional table extensions. For simple tenoning jobs, a table-mounted sliding table is available; for massive tenons a sturdy machine-mounted sliding table offers the woodworker flexibility only found on larger, more expensive machines. Simply put, the TS200 is a heavy duty machine designed to give you years of trouble free performance .

Startrite 401E Industrial Bandsaw

Tue, 10 Jan 2012 16:48:02 GMT

The strength of the bandsaw bodies allows the blade to be tensioned to 20,000psi and above when needed providing proper blade tension for accurate cutting. Because of their rigid bodies they also run at 1500 M/min, about twice the speed of a typical cheap far eastern import. This provides a cleaner, faster cut with a better finish.

Built with the same strong frame as the 401S but with electronic braking and roller guides it provides the opportunity to own a precision built, high quality, European machine for the same price as a far eastern import. At this price there is nothing to match the performance
and durability .

Jet HVBS-812 RK Metal Bandsaw

Tue, 10 Jan 2012 15:35:32 GMT

The Jet HVBS-812 RK Metal Bandsaw is a bandsaw suitable for the larger fabrication and general engineering workshops. It features increased motor power, four blade speeds, double row ball bearing blade guides, a built-in coolant system and greatly increased cutting capacity. The downward cutting pressure is controlled by a fully adjustable hydraulic damper with an on/off valve and there is an automatic cut-off at the end of the cut. The vice rotates for mitre cutting and there is an adjustable material stop for consistent repeat length cutting. Supplied with coolant system and blade .

Kreg 4'x8' Face Framing Table

Tue, 10 Jan 2012 15:12:28 GMT

Retractable Squaring Fence
The aluminum squaring fence on the left side of the table retracts out of the way to accommodate frames longer than 8’. Just begin your frame with the squaring fence up, then retract the fence as needed

Customized Setup
Each clamping cylinder can be independently controlled, so you can actuate each cylinder individually or activate them all at once with a master switch located at the bottom of the clamping arm

Powerful Clamping
The four high-quality clamping cylinders apply tremendous pressure on the joint line to maintain a flush assembly. The clamping arm rolls easily on roller bearings and each cylinder glides smoothly along thearm for perfect positioning .

DK5100 Panel Boring Pocket Hole Machine

Tue, 10 Jan 2012 14:57:54 GMT

Individual Control
Each of the five spindles is controlled with an on/off switch located on each clamping tower, giving you instant control of every spindle. Drill with all five spindles at once or turn a couple off to best meet the needs of your project.

5 Pocket-Holes, 1 Machine Cycle
The DK5100’s five spindles are spaced 6” on-center, the perfect spacing for many panel applications. A simple tap of the foot pedal will create five uniform Pocket-Holes in less than 2 seconds. Nowthat’s productivity.

Pneumatic Power
All five drill spindles are driven by industrial grade pneumatic motors that are designed to provide you with plenty of drilling power, panel after panel, year after year .

Jet JWL-1220VS Variable Speed Woodturning Lathe

Tue, 10 Jan 2012 09:42:15 GMT

Variable speed is a must for anyone serious about woodturning !

The heavy duty cast iron bed of this lathe has a finely ground top surface which ensures stability and minimal vibration during operation. The thick walled cast iron headstock and tailstock provide rigidity, add strength and years of trouble-free turning pleasure. The tailstock is hollow (9mm bore) allowing long-hole boring to take place using a standard long-hole boring auger, and features auto ejection of centres. Quick release levers allow for easy and accurate positioning of tool rest and tailstock. The lathe is powered by a 560 Watt variable speed DC motor suitable for continuous operation. The spindle speeds range from 200 to 4,300rpm, using the variable speed control and belt ratios. Solid rubber feet help to eliminate movement while in operation. The tailstock barrel has 50mm of movement and a live centre is included. The spindle is indexed every 15° and has a locking pin mechanism at the rear of the headstock. Supplied with: work light, 150mm tool rest, 250mm tool rest, drive centre, live centre and 75mm face plate. This is a great lathe for those looking for extra quality and capacity but retaining portability .

Jet JWL-1220 Woodturning Lathe

Tue, 10 Jan 2012 09:16:22 GMT

The Jet JWL-1220 Lathe offers larger capacities and motor power than is normally found in small bench top lathes, the heavy duty cast iron bed of this lathe has a finely ground top surface and ensures stability and minimal vibration during operation.The thick walled cast iron headstock and tailstock provide rigidity, add strength and years of trouble-free turning pleasure. The tailstock is hollow (9mm bore) allowing long-hole boring to take place using a standard long-hole boring auger, and features auto ejection of centres. Quick release levers allow for easy and accurate positioning of tool rest and tailstock.The lathe is powered by a 700W induction motor suitable for continuous operation. The spindle speeds range from 400 to 3,300rpm, within the choice of 6 belt ratios. The spindle nose has the very common 1" x 8TPI thread and a 2MT internal taper, so a large range of accessories are available.Solid rubber feet help to eliminate movement whilst in operation. The tailstock barrel has 50mm of movement and includes a 2MT live centre. The spindle is indexed every 15 degrees via a locking pin mechanism at the rear of the headstock.Supplied with: work light, 150mm tool rest, 250mm tool rest, drive centre, live centre, T04M/T38 spindle adaptor and 75mm face plate. This is a great lathe for those looking for that extra quality and capacity but retaining portability .

Startrite PS315 Panel Saw

Tue, 13 Dec 2011 13:56:15 GMT

The Startrite PS315 panel saw is our entry level industrial panel saw.
The ps315 offers exceptional value for money.

This saw is a good choice l for the smaller professional workshop looking for a good product at a competitive price.

We at Markfield woodworking machinery believe this is a great little saw for start up companies or for companies looking for a second sa w

Startrite 502E Bandsaw

Thu, 01 Dec 2011 13:46:22 GMT

Bandwheels are cast iron which are balanced and fitted with rubber tyres that are ground with a crowned surface to aid tracking. The top wheel is mounted on a heavy tensioning mount. Adequate tensioning is critical for accurate straight cutting and the mechanism fitted to this machine is probably the heaviest on the market at this level.

- The toolpost is a solid steel bar mounted in a heavy casting. The post is machined with a rack to enable safe and easy rack and pinion adjustment of the upper blade guide and guard. The side guides are industrial roller guides which offer a good surface area to resist blade twist and have easy and precise cam adjustment for simple setting. The rear thrust rod is a steel bar fitted with a carbide tip - a simple and effective solution that has been used by Startrite for many years.

- The tensioning system is a very substantial steel construction providing ample blade tension for the capacities of the machine.

- The table is seated on a heavy cast iron double trunnion. The trunnion is machined to ensure smooth and accurate performance and each side has a solid, metal locking handle which provides a rock solid foundation. The table itself is large, heavily ribbed and surface ground for flatness. The table insert is large enough to allow easy access to the lower guide assembly and the table slot is on the side of the table so there is an unbroken and smooth table surface on which to feed your material into the blade.

- The rip fence is deep and made from a heavy extrusion. This is fixed to a cast iron mount which is in turn mounted on a steel bar that runs the full width of the table to enable easy use of the fence on either side of the blade.

- The Trade Range of Bandsaws are built to comply with regulation BS4163, making them ideal for use
in educational.
The motor is equipped with a mechanical brake, whilst user access can be restricted through the keyswitch. The doors have microswitches and the machines are fitted with a kickswitch .

Wadkin FSP 180 Four Side Through Feed Planing Machine

Fri, 11 Nov 2011 11:07:23 GMT

Used Wadkin FSP 180 Through Feed Four Sided Planing machine.

Complete with a set of blocks, setting gauge, dust header spanner and manual

The machine is fitted with a timed interlock
Please call us to arrange a demo, you are welcome to bring your wood , as long as it's not an entire job !

Casolin Mega 4 / 230 Planer Moulder 2005

Fri, 07 Oct 2011 14:42:44 GMT

The four sided spindle moulder Casolin with 4 fixed shafts :
first horizontal shaft surface planer , second vertical right shaft , third vertical left shaft , fourth horizontal over shaft .
Machine arranged with mechanical display for finished piece width
and automatic updating to the tool changing .
Automatic pressure for feeding rollers .
Device with shaving tool.
Machine right to work squared parts.
Available also the model with last shaft universal Mod. Variant 4+1 .

Robland BM3000 CNC boring machine

Tue, 04 Oct 2011 17:32:48 GMT

Technical data
Y axis 750 mm
X axis unlimited/supported 3000 mm
Z axis max thickness 30 mm
A axis 360°
- Movement drilling head: 20 m/min
- Min. Dimensions workpiece: (X) 300 x (Y) 100 x (Z) 12 mm
- Head with 4 chucks and integrated sawblade
- The saw operates according to the X axis
- Max. Depth of the groove that can be made with the saw blade: 10 mm
- Max/min diameter of the holes that can be drilled: 3mm - 35 mm

PLEASE SEE PDF FOR FURTHER INFORMATION

Used Robland x260 Combination woodworking machine 415v 3 phase

Tue, 13 Sep 2011 16:03:13 GMT

Used Robland x260 Combination woodworking machine 415v 3 phas e

Mpower 512MS Spindle Moulder

Mon, 12 Sep 2011 10:06:52 GMT

Cast iron table 1000 x 800mm.

4kw (7.5hp) motor.

Forward and reverse spindle rotation.

5 speeds up to 10,000 rpm.

Interchangeable spindle.

TREND WINDOW SYSTEM FRIENDLY

Startrite s1.6 Panel Saw

Thu, 08 Sep 2011 15:21:24 GMT

A year 2000 Holz tech / Startrite s1600 compact panel saw for sale, main blade and scrible blade CE spec sa w