X    Close

Grand Total (inc VAT): £0.00

Checkout View Cart
  • Login
  • Register
  • Compared Machines
  • My Account

Call Us On 0116 289 3469
or email

Finance Available

Part-Exchange Available

Servicing And Support

We Buy Your Machines

Compacto Fox 60 Briquetting Press

  • Briquette diameter: 60 mm
  • Output (depending on Material): 35 – 80 kg/h
  • Motor: 5.5 kW
  • Length: 1680 mm
  • Width: 1100 mm
  • Height: 1500 mm
  • Weight: 760 kg
  • Oil tank: 110 Litre
  • Hopper Diameter: 1000 mm
  • Hopper Content: appr. 0,7 qbm
  • Pump: 27 Litre
Make Compacto
0 5 0
£12,750 (ex VAT)

Available to Order

Accepted Payment Methods

Payment Methods

The Fox briquetting presses are able to manufacture materials like wood shavings, sawdust, wood chips, dust and other residual materials into stable, cylindrical briquettes. Compared to loose material, the initial volume will be reduced by up to 90%.

Residual materials transformed into compact briquettes can be used energetically much more efficiently and sold profitable.

A further advantage based on briquetting is the reduction in the danger of fires and explosions. Because of the fact that briquettes are considered as low-flammable like solid wood, there aren't any additional costs for complex fire protection regulations.

The material moisture content shouldn't exceed a maximum of 18% ATRO. Furthermore the granule size has to be smaller then 20 mm. By changing individual parameters, the briquetting presses can be adapted to customer materials, required throughput performances and individual conditions. It’s possible to choose from various cylinder sizes, drive engine variants and silo shapes. The filling of the briquetting press can take place manually or automatically. During the material flow via a screw, a belt conveyor or a suction unit, the machine recognizes the fill level of the silo and is able to start and stop automatically. There is no operating personnel necessary. The produced briquettes can be transported with a briquette transport pipe to the briquette stock without any further use of energy, just by pressure of the hydraulic. Function: Shavings are fed in the hopper, where it is dosed and supplied by an integrated agitator into the pre-compression unit. In this unit runs a hydraulic piston, which pre-compresses the material and feeds the main cylinder. The hydraulic piston presses the material into the closed sleeve until the adjusted pressure is reached (which is usually set up to 80 bars). Then the sleeve opens and finally a stabile briquette is produced. The more homogeneous the material, the more uniform results the length of the produced briquettes.

There are some requirements for the raw materials:

  • The water content (ATRO) has to be between 6% – 18% - max. length of the material: 15 mm
  • The temperature where the machine is placed has to be at minimum +5 degrees.
  • The supply unit has to be free of metals and mineral contamination.

Otherwise, damages on the pressing tools and / or increased requirement of wear parts could be the consequence.

Delivery and installation is available on all of our machines.

Please contact the showroom to discuss the best option for you, or submit us an enquiry using the form on this page

Product Questions

No questions yet. Be the first to ask the question!

Product Name:

Your Name:

Email Address:

Phone Number:


Captcha Check: 10 + 10 =

Only registered users can write reviews. Please, log in or register

© 2018 MW Machinery (Markfield Woodworking Machinery Ltd). All Rights Reserved | Company No. 01745147
Website Designed & Supported by

Payment Methods