Menu
Cart
X    Close

Grand Total (inc VAT): £0.00

Checkout View Cart
  • Login
  • Register
  • Compared Machines
  • My Account

Call Us On 0116 289 3469
or email info@mwmachinery.co.uk

Finance Available

Part-Exchange Available

Servicing And Support

We Buy Your Machines

Biesse Rover J FT 1530 CNC Router

45000

New Biesse CNC 10 x 5 Machining Centre

Working field:

X = 3078mm

Y = 1563mm Z = 200mm

Axes stroke:X = 3490mm

Y = 2020mm, Z = 260mm

Maximum axes speed:

X = 22.5m/min

Y = 22.5m/min

Z = 12.5m/min

VACUUM LOCKING SYSTEM – ROVER J 1530 G FT

Work table with prearrangement for vacuum and electrical connection for vacuum pumps. Division of the table in 4 independent vacuum zones with manual selection.

0 5 0
£45,000 (ex VAT)

Available to Order

Accepted Payment Methods

Payment Methods

CNC MACHINING CENTER WITH GANTRY STRUCTURE - ROVER J FT

As guarantee of the quality of its products and services, BIESSE has been certified ISO 9001 since 1995 and works in accordance with the UNI EN ISO 9001:2000 norms.Most of the technological components assembled on the machining centres is produced by companies of the Biesse Group or by world-wide known companies included in the Biesse "Register of Qualified Suppliers", which have strictly cooperated with Biesse through the years.The running tests of each machining centre include the following stages: Intermediate control of operating units and pre-assembled components Non-stop running test as machining simulation for a minimum period of 10 hours Control of X and Y axes precision and positioning repeatability by means of an interferometric laser (VDI/3441 norm)

Gauging of the X and Y axes through a software function: the values detected during the laser tests are elaborated by the N.C. and transmitted to the axes drives in order to improve the positioning precision Functional tests for routing and boring operations on panels positioned on all the machine origins

Main frame and mobile upright beam

The machine frame is made of thick electrowelded steel sheets, properly strengthened in the most stressed areas.The upright beam, mobile in the longitudinal direction (X axis) is made of electrowelded steel with gantry structure: thick steel sheets and reinforcing transversal elements allow to minimize the twists generated by the materialstress relief generated by the metal machining and obtain the highest levels of precision.

Axes movement

Axes drives and motor systemsBiesse uses Brushless motors, controlled by digital axes drives.The interfacing between axes drives and numerical control is digital.The digital system Mechatrolink allows the following: Higher machining speed, since a portion of the toolpath is controlled by the axis drive instead of the numerical control Higher working precision, thanks to a faster data processing Higher reliability, thanks to a reduced wiring system which eliminates electrical interferences that may occur on analog systems

X and Y axes transmission

The operating unit moves along the longitudinal axis (X axis) and transversal axis (Y axis) by rack and pinion system (a solution that BIESSE is been using for twenty years) which grants high acceleration and movement speed.Both rack and pinions are built in accuracy class 6 (DIN 3962 norm).The mobile upright beam has two independent drives, one on each side.Z axis transmissionAs the operating unit moves in the vertical direction (Z axis) with a relatively short travel, BIESSE uses the ballscrew system with preloaded nut for backlash compensation and repeatability in positioning precision. The movement is transmitted to the screw through a flexible joint.The ball screws are in T7 accuracy class.

Axes guides

A couple of linear guides with recirculating balls running block is located on every axis to ensure an high level of precision and smoothness of each movement.Manual lubricationCentralized manual lubrication system for the main movements: X axis: 4 running blocks of the linear guides and 2 for the racks (1 on each side of the machine) Y axis: 4 running blocks of the linear guides and 1 for the rack Z axis: 4 running blocks of the linear guides and 1 for the ball screw nut

Work table

Rover J FT operates in single area mode.The work table is made of extruded aluminum, with T-slots and includes: 4 side pop up mechanical stops 8/10 rear pop-up mechanical stops 8/10 front pop-up mechanical stops 4 workpiece clamp with manual setup to be fitted in the T slots of the extruded aluminum worktable

Operating unit

The operating unit is made of:

Electrospindle with MANUAL tooling- 5kW (6.8 HP) with ERC 32 collet coupling, air cooled

Main specifications

Ceramic bearings

Rh rotation

4.2 kW (5.7 Hp) from 12,000 to 15,000 rpm in S1 duty

5 kW (6.8Hp) from 12,000 to 15,000 rpm in S6 duty

Rotation speed from 1,000 to 24,000 rpm, programmable by N.C.

*It includes a mechanical pressing ring with integrated dust collection functionality

Safety devicesInclusive of:

Left side curtain guard positioned on the machine's beam Curtain guard for the operating unit positioned on the machine's cover Emergency rope around three sides of the machine Emergency push buttons on the onboard electrical cabinet

New Biesse CNC Machining Centre

Technical data:

Working field:X = 3078mm, Y = 1563mm

Z = 200mmAxes stroke:X = 3490mm,

Y = 2020mm,

Z = 260mm

Maximum axes speed:X = 22.5m/min, Y = 22.5m/min, Z = 12.5m/min

VACUUM LOCKING SYSTEM – ROVER J 1530 G FT

Work table with prearrangement for vacuum and electrical connection for vacuum pumps.

Division of the table in 4 independent vacuum zones with manual selection.

*Spoilboard not included

*The system allows to use up to 2 vacuum pumps

SIDE RACK TOOLCHANGER ON MACHINE'S BASE FRAME - FOR ISO OR HSK TOOLS

Toolchanger capacity:Rover J 1224 x 7 pos. Rover J 1530 x 8 pos

BH 5 BORING HEAD

Working unit which can be equipped with up to 5 independent tools for single and multiple

Boring's on panel's top face.

The head is composed of:* 5 independent vertical spindles with a pitch of 32 mm placed along X

NUMERICAL CONTROL SYSTEM WITH WINDOWS 7

* Biesse works basic machine version included

HSK F63 TOOL HOLDER FOR ERC40 COLLET - RH ROTATION *Maximum rotation speed 24,000 rpm CE SAFETY DEVICES FOR EXPRESS PACK with 3 sides accessInclusive of:- 3 sides light barriers- back side with horizontal light barriers- 1 fence 2 m high on LH side

New Biesse CNC Machining Centre

Technical data:

Working field:X = 3078mm, Y = 1563mm

Z = 200mmAxes stroke:X = 3490mm,

Y = 2020mm,

Z = 260mm

Maximum axes speed:X = 22.5m/min, Y = 22.5m/min, Z = 12.5m/min

VACUUM LOCKING SYSTEM – ROVER J 1530 G FT

Work table with prearrangement for vacuum and electrical connection for vacuum pumps.

Division of the table in 4 independent vacuum zones with manual selection.

*Spoilboard not included

*The system allows to use up to 2 vacuum pumps

SIDE RACK TOOLCHANGER ON MACHINE'S BASE FRAME - FOR ISO OR HSK TOOLS

Toolchanger capacity:Rover J 1224 x 7 pos. Rover J 1530 x 8 pos

BH 5 BORING HEAD

Working unit which can be equipped with up to 5 independent tools for single and multiple

Boring's on panel's top face.

The head is composed of:* 5 independent vertical spindles with a pitch of 32 mm placed along X

NUMERICAL CONTROL SYSTEM WITH WINDOWS 7

* Biesse works basic machine version included

HSK F63 TOOL HOLDER FOR ERC40 COLLET - RH ROTATION *Maximum rotation speed 24,000 rpm CE SAFETY DEVICES FOR EXPRESS PACK with 3 sides accessInclusive of:- 3 sides light barriers- back side with horizontal light barriers- 1 fence 2 m high on LH side

Delivery and installation is available on all of our machines.

Please contact the showroom to discuss the best option for you, or submit us an enquiry using the form on this page

Product Questions

No questions yet. Be the first to ask the question!

Product Name:

Your Name:

Email Address:

Phone Number:

Message:

Captcha Check: 5 + 10 =

Only registered users can write reviews. Please, log in or register

© 2017 MW Machinery (Markfield Woodworking Machinery Ltd). All Rights Reserved | Company No. 01745147
Website Designed & Supported by www.SpiralMedia.co.uk

Payment Methods