The Biesse Active Edge is a new compact, semi automatic edge-bander perfect for small shops. Designed but not limited to shaped panels, the machine uses a hot melt glue pot and tape sizes from to. Combine this with the Biesse K60 Trim for a perfect solution for shaped edging work.
PLC control system
Adjustable control board in ergonomic position.
PID temperature controller with display for monitoring and setting temperature of 2 zones.
Display for working speed monitoring and setting.
Precise edge length control by using encoder system.
Base frame: provides the whole machine with stability and strength.
Work Table: Provided with matrix table to suit different panel shapes.
Gear motor for driving glue shaft, edge feeding roller and pressing roller. Working speed: 2-12 m/min. 0.37 kW motor
WORKING UNITS USED IN THE BASIC COMPOSITIONS
GLUING, EDGE FEEDING and EDGE PRESSING units VC-60.
Hot melt glue application both on the panel and on the edge, edge feeding to be applied on to the panel, automatic cut of the edge-banding material to panel length, edge pressure to ensure a perfect sticking to the panel.
Glue pot and glue spreading rollers. Quick heating and double thermostat for differentiated temperature control. The glue pot is completely coated with non-adhesive material. Automatic glue temperature lowering in the glue pot when the machine has been idle for a set period of time. Glue roller rotating in the same direction of the feeding direction.
AUTOMATIC Edge feeding system for edges in rolls and manual for edges in strips, complete with roll holder disk diameter Ø 800 mm. The edge magazine table has a manual vertical adjustment.
Cutter knife for the automatic cutting of edge-banding material in rolls with a maximum thickness of 3 mm and with a maximum section of 200 mm². Manual and fast adjustment of working pressure according to the thickness of edge-banding material being used.
Edge pressing system consisting of a motorized roller diameter Ø 40 mm.
TECHNICAL SPECIFICATION ACTIVE EDGE
Panel height 10 - 60 mm
Min Height of edge-banding material 12 - 64 mm
Thickness of edge-banding material in rolls 0,4 mm - 3 mm
Thickness of edge-banding in strips 0,4 mm - 3 mm
Min. banding radius 25 mm (flat edge-banding 0,4 mm)
Min length of edge-banding material 350 mm
Working Speed 2 - 12 m/min
Glue pot capacity 3 Kg
Max diam. for edge roller 800 mm
Pneumatic connection 7 bar
Working voltage 400V /50Hz 3 phases + Neutro
Delivery and installation is available on all of our machines.
Please contact the showroom to discuss the best option for you, or submit us an enquiry using the form on this page