Configuration
Dimensions crate	1350 x 950 x 1100 mm
Voltage	230 - 400  V
Weight	650 kg
Motor power	5, 5  kW
Planers
Number of knives	4
Dimensions knives	510 x 28 x 3 mm
Dimensions table	1050 x 510 mm
Diameter suction outlet	160 mm
Diameter cutter-block	100 mm
Thicknesser capacity	250 mm
Feeding speeds	5 / 8 / 10 / 16 m/min
Serrated infeed roller	1 dia 50 mm
Outfeed roller	1 dia 50 mm

ROBLAND D 510

510mm width x 250mm depth
Thicknesser.
4 blade block.
Electric rise and fall.
Digital readout.
4 speed feed.

Table:
The thicknesser table, mounted via 4 big posts offers great stability, even when planing long, heavy timbers.
For wet or damp timber, fully retractable rollers can be provided. Please note that this option must be ordered with the initial order for the machine.
Planed table:
The big cast iron table is precision planed for smooth sliding of the wood.
Highest quality ‘cold process machining’ is used, which produces ensures that the table surface stays absolutely flat throughout its life.
Digital read-out
Standard equipment on the machine: digital read-out with precision 1/10 mm.
Frame:
The frame is built of 6 mm steel plate, and is carefully designed to maximise strength and rigidity, it’s made in a so called ‘box frame’ resulting in an extremely sturdy and torsion resistant base.
Serrated infeed roller
Wood pushers on both in-and outfeed side
Four 18% HSS knife cutter-block
(Optional: 4 reversible knife cutter block)
Smooth outfeed roller
Option: table rollers
Motors and transmissions:
The machine is equipped in the standard version with a 5,5 kW (7,5 hp) motor.
Optional motor of 7,5 kW (10 hp) can be provided. Standard tension of the machine is 400 Volt, upon request the machine can be made in 230 Volt three phase.
The transmission of the cutter block is achieved by double V-belts; the transmission of the feed rollers is achieved by sprockets and chains.
Thicknesser capacity:
Standard equipment on the D-510: power rise and fall of the table, digital read-out with precision 1/10 mm. (capacity 250 mm)
Feeding of the wood
Standard on all machines: heavy pushers on both in-and outfeed side, 100 mm diameter, 4 knife 18% HSS cutter-block with magnetic knife setter jigs. The optional 4 turn blades cutter-block provides a major advantage of quick precision setting of knives. Also standard feature on the machine: separate motor drive of feed rollers with 4 speeds (5/8/10/16 m/min.)
Positioning the table at 1/10 mm poses no problem thanks to the frequency variator controlled rise and fall drive.