Configuration
Dimensions machine crate (LxWxH)	2270 x 1330 x 1020  mm
Voltage three phase	230 - 400 V
Voltage single phase	230 V
Weight	1250 kg
Motorpower	7, 5 hp
Main Saw
Dimensions sliding table	400 x 2500 mm
Dimensions table	1530 x 700 mm
Diameter dust suction	120 mm
Diameter sawblade	400 x 30 mm
R.P.M. main saw blade	3000 / 4000 / 5000 R.p.m.
Saw blade tilt	0 - 45 °
Speed R.P.M.	5000 R.p.m.
Rip capacity	1380 mm
Max. depth of cut on 45°	100 mm
Max. depth of cut	125 mm
Saw stroke	2500 mm
Scoring saw
Diameter scoring blade	100 (120) x 20 mm
Motor scoring unit	0, 75 hp
Scoring blade tilting	0 - 45 °
Speed scoring blade	7000 R.p.m.
Depth of cut scoring blade	0 - 4,5 mm

» Sliding table
» Extra support piece is standard only on the Z3200 and Z3800. The loading lock assures that the table does not move as you load a new panel on the saw.
» Hold down clamp
» Hold down clamp and separate mitre fence with flip stop is standard on all “Z” machines.
» Cut-off fence
» The main 90° cut-off fence telescopes to 2.7 m and assures square cuts. On the photo it is shown in the back position for the purpose of putting material in front of the fence.
» Sliding table
» The hard anodized extrusion of the sliding table is precision machined. The heart of the sliding table is is 8 hardened steel rods inserted into the table extrusion, thus making the whole system extremely wear-free.
» Sawguard
» The overhead sawguard is hinged which makes it easy to fold it out of the way.
» Adjustment
» Height adjustment of main s

1. Extra support piece is standard only on the Z3200 and Z3800.The loading lock assures that the table does not move as you load a new panel on the saw.
2. Hold down clamp and separate mitre fence with flip stop is standard on all “Z” machines.
3. The main 90° cut-off fence telescopes to 2.7 m and assures square cuts.
4. The overhead sawguard is hinged which makes it easy to fold it out of the way.
5. The hard anodized extrusion of the sliding table is machine precisioned. The heart of the sliding table is 8 hardened steel rods inserted into the table extrusion, thus making the whole system extremely wear-free.
6. Height adjustment of main sawblade and scoringblade, and left to right adjustment of scoring blade.
The adjustment is very positive using a cam system with precise window indicating tilt degree.
7. Handwheel for tilting the complete sawunit, and large precise window indicating tilt degree. The machine has positive stops at 90° and 45°.
8. Cast iron rip fence with micro adjustement and optional digital read-out.
The guide rail for the rip fence is made of dia.50 mm solid steel.