Motor power	4kW / 415V
Depth of cut (max at 90°)	80mm
Depth of cut (max at 45°)	55mm
Blade diameter / bore	315mm / 30mm
Blade tilt	0° - 46°
Saw-blade replacement	SprintLock
Rotational speed	5000rpm
Blade thickness (max)	15.5mm
Cutting width (max with fence)	850mm
optional	1250mm
Cutting length	1700mm
extensible up to	3200mm
Sliding-table length	3000mm
optional	1900mm
Table height	900mm
Control	PowerPC
Control panel	145 mm TouchScreen
Duct - machine frame	Ø 120mm
Duct - protective cover	Ø 60mm
Extraction airflow required (min)	1200m³/hr
Overall L x W x H	3000 x 1570 x 1600mm
Weight	1050kg

A modern sliding table saw must be able to reliably perform precise final cuts as well as pre-cuts. It should be quick, faultless and comfortable to use and operate in a reliable manner for many years.

Modern Touchscreen
Every T60 is equipped with an intuitive touch screen control providing step-by-step operator guidance through complex work processes. By entering the measurements, the cutting height and angle can be adjusted precisely in no time.
High-Quality Mechanical Design
On all T60 models, important mechanical components such as the sliding table, the crosscut fence, and the rip fence are made of high-quality material and are very durable. The rip fence runs on a bearing to give smooth operation set manually by the scale on the T60 basic but on the T60 classic the cutting width can be adjusted with a handwheel from the operators normal working position using the digital display on the integrated control panel. The sliding table is designed as you would expect from a Martin machine: with a replaceable table lip and stable, highly-ribbed hollow-chamber profiles. The crosscut fence features smooth operation of the fence carriage and standard fine adjustment of the length stops – vital for precise cuts.

The T60 Basic supports a maximum blade diameter of 315mm and has a blade guard at the riving knife. The Basic model enables cutting heights of up to 80mm, the T60 Classic allows you to cut material of a thickness of up to 130mm.
The saw blade of the T60 Basic is powered by a 4kW (5.5HP) motor with 5000rpm. The T60 Classic motor offers three speeds and a 5.5kW (7.5HP) power. Another difference between the two machines is the cutting-width adjustment: on the T60 Basic, the cutting width is set manually by means of a scale; on the T60 Classic, this can easily be done by means of a hand wheel from the operator position, using the digital display integrated in the control.
Customisation
Both machines can be equipped with an optional scoring unit whose scoring height and position can easily be set while the machine is running