Stenner ST80 Band Resaw
Move your mouse over thumbnails to see larger images
Please click on an image for a zoom view
Product Options
|
Stenner ST80 Band Resaw
|
P.O.A.
|
|
» Rubber covered feed rollers
|
P.O.A.
|
|
» Arris feed roller
|
P.O.A.
|
|
|
Specification
|
Pulley Wheel Diameter
|
850mm
|
|
Blade Length
|
5010 - 5080mm
|
|
Blade Speed
|
na
|
|
Blade Width
|
80mm
|
|
Blade thickness (kerf)
|
0.8 - 1mm
|
|
Saw to fence
|
305mm
|
|
Saw to feed rollers
|
230mm
|
|
Depth of cut
|
310mm
|
|
Table Size
|
|
|
Height of table
|
900mm
|
|
Feed speeds
|
5 - 60 m/min (infinitely variable)
|
|
Cleaner fluid capacity
|
3 litres
|
|
Pneumatic Requirements
|
0.2 litres/ sec @ 6 bar
|
|
Dust Extraction Outlet
|
1 x 150mm
|
|
Overall L x W x H
|
1725 x 840 x 2115mm
|
|
Machine Weight
|
1500 kg
|
|
Motor
|
11 kW
|
|
Power
|
3 phase
|
Features
» Manufactured in the UK » Heavy cast bandwheels » Full cast iron table » Pneumatic saw straining » HMI control unit » Automatic blade lubrication » Multi roller fence » Large saw to fence capacity » Braked motor » Pitless construction » Key operated starter » Interlocked doors » Fault diagnostics
Description
The ST80 is the latest addition to Stenner’s famous range of radial arm resaws, designed to produce a machine of classical strength and durability which would be equally at home in a small joinery shop or a busy service mill. This all new resaw continues the Stenner tradition of constructing a compact, well engineered machine and combining it with the latest in technology in a package that has both reliability and a very high performance capability. The ST80 is a true resaw but requires no special installation. The machine needs only to be bolted to the factory floor and connected to mains electricity, compressed air and dust extraction. Capable of handling sections of over 500mm width and a maximum depth of cut of 310mm, the ST80 has pneumatic saw straining which, coupled with factory set replaceable pressure saw guides, ensure accuracy of cut and minimise blade deviation. These features are combined with a 11kw (15hp) main motor and a feed system controlled by electronic variable speed device offering an operating range from 5 to 60 metres/min. The multi-roller fence tilts to 35 degrees for angle cutting and offers 305mm (12 in ) saw to fence capacity at 90 degrees. The ST80 is operated by means of an HMI controller which governs the feed speed, set up and diagnostics, thereby increasing reliability of electrical controls and simplifying machine operation.
|
|