Min. thickness	130mm
Max. width	230mm
Max. diameters of cutting head	190mm
Feeding rollers diameters	120mm
Spindle diameter	40mm
Feeding speed 6; 12m/min.	6 : 12 m / min.
Horizontal spindles motor power	2x5,5kW
Vertical spindles operating length	130mm
No. of operating spindles	4
Working voltage	415v
Horizontal spindles motor power	20kW
Horizontal spindles operating length	190mm
Table and fence adjustment range	10mm
Cutting head diameters	100-180mm
Spindle revolutions	6000/min
Vertical spindles motor power	7,5kW
Feeding table length	1700mm
Dimensions:
Width 1460mm
Length 3550mm
Height 1510mm
Weight	1300kg

* For high precision jointing, grooving and shaping.

* Vertical and horizontal adjustable spindles.

* Highly suitable for profiling your work pieces.

* Complete with four cutterheads.

Head sequence:-


First Bottom.............5.5kW(7.5hp)
Fence/Near Side.......7.5kW(10hp)
Top..........................5.5kW(7.5hp)

Capacities:
Maximum size of timber admitted 230 x 130mm
Maximum size of finished work 220 x 120mm
Minimum finished size 18 x 7mm
Minimum length single/through- feed 480mm

Cutting Circles:
Minimum cutting circle 100mm diameter
Maximum cutting circle 180mm diameter
Maximum cut on first Bottom 10mm
Edge reference to first Bottom 140 x 10mm

Feed System:
Feed speeds 6 & 12 m/min with 0.8/1.1 kW feed motor
Spring loading to feed rollers
Feed roller diameter 120mm
Inch forward control for setting

Electrical:
Feed motor 0.8 / 1.1 kW
400v/3ph/50hz
Motor start and stop buttons
Control panel master stop
No volt and overload protection
Lockable main isolator

Feed selections:
2 metre long in-feed straightening table and fence
Feed speeds 6 & 12m/min
Spindle speed 6000 rpm

Cutter equipment:
Set of 3 knife cutter blocks comprising of:
Edge reference disc 140 x 10mm
Two 230mm x 120mm diameter three knife planing cutterblocks each with three 3mm HSS knives
Two 130mm x 120mm diameter three knife planing cutterblocks each with three 3mm HSS knives

Cutting Head Units:
40mm diameter spindles with rotation of 6000rpm
All spindles have horizontal and vertical adjustments except 1st bottom which has vertical only. No vertical adjustment between top head and feed rollers (fixed cutting circle)
Maximum cut on 1st bottom and 1st fence side head is 10mm

Included with the machine:
Lift up front safety cover electrically interlocked with timed control
Mechanical digital read-outs for width and thickness measuring 0.1mm
Idle side roller pressures opposite fence side head, moving with near side head
Idle top roller pressure opposite near side head
Dust hoods (120mm diameter)
Setting device for planing knives
Instruction and spare parts manual