|
Working width (at a tool cutting circle of 140mm)
|
15-230mm(.59"-9.1")
|
|
Working height (at a tool cutting circle of 163mm)
|
10-150mm(36"-6")
|
|
Number of spindles, min-max
|
04/07/2009
|
|
Basic motor capacity per spindle
|
5.5 KW / 7.5HP
|
|
Basic motor capacity of feed
|
4 KW / 5HP
|
|
Spindle speed
|
6000 RPM
|
|
Spindle diameter
|
40mm (50mm option)
|
|
Tool cutting circle, first bottom spindle, min-max
|
125-160mm(4.9"-6.3")
|
|
Tool cutting circle, vertical spindles, left, min-max
|
112-200mm(4.4-7.9")
|
|
Tool cutting circle, vertical spindles, right, min-max
|
112-200mm(4.4-7.9")
|
|
Tool cutting circle, horizontal spindles, top, min-max
|
100-200mm(3.9-7.9")
|
|
Tool cutting circle, horizontal spindles, bottom, min-max
|
100-200mm(3.9-7.9")
|
|
Feed speed, infinitely variable by frequency driven motor
|
6-24 m/min(19.2-78 fpm)
|
|
Feed roller diameter
|
140mm(5.5")
|
|
Feed roller width
|
50mm(2")
|
|
Pneumatic pressure for feed rollers, max
|
6 bar (87psi)
|
|
Adjustment range for infeed table and edge-jointing fence
|
10mm(.39")
|
|
Adjustment range of vertical spindles (axial)
|
30mm(1.18")
|
|
Adjustment range of horizontal spindles (axial)
|
20mm(.78")
|
|
Length of the straightening table
|
2M(78.7")
|
|
Mechanical digital readouts for the pressure shoes & hold-down unit
|
|
|
Full sound and safety enclosure
|
|
|
Motorized vertical adjustment of feed
|
|
|
Lateral pressure roller opposite first right spindle
|
|
|
Chainless cardan feed system
|
|
|
Diameter of dust hood for vertical spindle
|
Ø125mm(5")
|
|
Diameter of dust hood for horizontal spindle
|
Ø125mm(5")
|
» With Fine Features to Give You the Winning Edge in 4 Side Moulding
» Extremely Short Feeding Capability
» The unit can feed stock as short as 200mm. The cutting heads are specially designed so that there is a uniquely short distance between them. This results in a superior moulding finish.
» 6,000 RPM high speed spindle.
» Liftable Auxiliary Feed Roller
» The mechanism provides added smoothness for short workpiece feeding. The auxiliary feed rollers are power driven for effortless feeding, and are liftable for convenient cutter change or setup.
» Accurate Pressure Display
» The pressure on front and rear pressure plate for the top spindle is accurately displayed by the digital meter. This increases cutting stability.
» Short Stock Feeder
» This device permits the feeding of short stocks with a minimum length of 8". The short stock feeder is driven by a gear drive un
Choice of Machine Models -From LMC-423C (4-spindle) to LMC-723C (7-spindle).
All moulders awarded CE certification.
Faster feed speeds of up to 24 meters a minute are standard.
Programmable controller provides convenient depth of cut settings.(Optional)
Adjustment of each spindle can be easily performed by using the front adjustment lever.
The full safety enclosure serves as a chip guard and helps to reduce noise.
Each spindle is driven by an individual motor for powerful drilling and easy control.
Pneumatic pressure of the feed rollers can be easily set to provide an outstanding feeding effect.
Table surface is hard-chrome plated for maximum wear resistance.
All manually adjusted turning parts are housed in dry bearings for oil-free lubrication.
One-piece, cast iron machine frame is specially heat treated for maximum stability and rigidity as standard configuration.