Maximum cutting width	3 7/8" - 100mm
Maximum cutting height	6" - 152mm
Horizontal cross slide travel	3 1/2" - 88mm
Table length	23 1/2" - 600mm
Height (less op. lever)	20 1/2 " - 520mm
From to rear	18" - 457mm
Net Weight	86 lbs - 37kg

» One pair of H.S.S knives
» Length stop assembly
» Plastic guard
» Operating lever
» Two wrenches
» Instructions and parts list

Our "top of the line" bench type mitre machine. The horizontal cross slide makes it the most universal of all. Ideal for joiners and small picture frame shops. A problem solver for every woodworker. Two razor sharp knives are mounted on a vertical, lever-operated dovetail slide (knife block).Operation of the hand lever makes a 90º notch (two 45º mitre cuts).After each 90º notch cut, the knife block is brought forward with the handwheel (each turn = ¼ ").

As a handwheel and spiral feed screw advances the knife block forward into the work, the knives can cut anywhere over the width of the wood, useful for "V" cuts, birds mouths, glazing bar joints etc.

This "nibbling" action continues until the wood is almost cut through. The final cut is made, taking off a fine shaving ensuring a perfect joint completing the left and right hand mitre.